I was restoring my tab but it takes too much time, then i shutdown tab by force. Till now when i start my tab it shows a blue circle written inside it 64% installing windows and restart. This process continue when i start my tab.
Kindly if you have any solution plz tell about this
Best Answer
M
Matthew Meador
said
almost 6 years ago
Hello,
Thank you for your patience. Please see the link and information below to install Windows on your device again.
2. Plug in an empty Flash Drive that has at least 8 to 16 GB free into extra computer or device.
3. Run RUFUS and select the following parameters.
A. Device - Select your USB flash drive
B. Partition Scheme and target system type - GPT partition scheme for UEFI computer
C. File System – Fat32
D. Cluster Size - Leave as Default
E. New Volume Name - Winpe - it must be named this otherwise it won't work properly.
See photograph below as reference. Please make sure you check the box that says – create a bootable disk using ISO. Then you will upload the ISO you downloaded by right clicking the icon next to the ISO check box.
4. Turn off your Device and plug in your OTG cable and the Flash drive. Please use a USB 4 port HUB so you can use a keyboard if necessary.
5. Turn on device and constantly press the ESC button to get into BIOS.
6. Go to the last menu option and in the boot override section arrow down to "UEFI: <Thumbdrive>" and hit enter. If your device does not show boot override, you will need to manually set the Thumbdrive as first in priority under the boot options, then save/exit. It should then boot up and perform the flash and shutdown.
Thank you for your patience. Can you please tell me your device name, model number, and serial number and I'll be sure to provide you with a ISO image for your Excursion XB.
Best Regards,
Matthew
S
Sikanderabbasi001
said
almost 6 years ago
Hello
kindly send me windows 10 ISO recovery file.
Model No: VTA1005XB
SERIAL NO: A03011512000656
Regards
Sikander Abbasi
S
Sikanderabbasi001
said
almost 6 years ago
MODEL: VTA1005XB
SERIAL: A03011512000656
S
Sikanderabbasi001
said
almost 6 years ago
Model no: VTA1005XB
SERIAL NO: A03011512000656
M
Matthew Meador
said
almost 6 years ago
Answer
Hello,
Thank you for your patience. Please see the link and information below to install Windows on your device again.
2. Plug in an empty Flash Drive that has at least 8 to 16 GB free into extra computer or device.
3. Run RUFUS and select the following parameters.
A. Device - Select your USB flash drive
B. Partition Scheme and target system type - GPT partition scheme for UEFI computer
C. File System – Fat32
D. Cluster Size - Leave as Default
E. New Volume Name - Winpe - it must be named this otherwise it won't work properly.
See photograph below as reference. Please make sure you check the box that says – create a bootable disk using ISO. Then you will upload the ISO you downloaded by right clicking the icon next to the ISO check box.
4. Turn off your Device and plug in your OTG cable and the Flash drive. Please use a USB 4 port HUB so you can use a keyboard if necessary.
5. Turn on device and constantly press the ESC button to get into BIOS.
6. Go to the last menu option and in the boot override section arrow down to "UEFI: <Thumbdrive>" and hit enter. If your device does not show boot override, you will need to manually set the Thumbdrive as first in priority under the boot options, then save/exit. It should then boot up and perform the flash and shutdown.
7. Remove Flash drive before restarting.
PLEASE LET ME KNOW IF THIS WORKED FOR YOU.
Best Regards,
Matthew
A
ALDO FLORES BAEZ
said
almost 3 years ago
Amigo buenas noches puedes poner el iso de excursión XB-Serial-A03 porfavor tengo problemas para usar mi vulcan
A
Alcon Villa Gonzalez
said
almost 3 years ago
buenas me podrian ayudar con los controladores xb porfa
Sikanderabbasi001
Hello,
Thank you for your patience. Please see the link and information below to install Windows on your device again.
Excursion XB A03
https://drive.google.com/open?id=1b-q2wvZQT6V-0r-feYd3gqGtDla2Q0IA
Please follow the steps below to restore your device to the original state.
1. Download Rufus format partition tool from the link below.
https://rufus.akeo.ie/
2. Plug in an empty Flash Drive that has at least 8 to 16 GB free into extra computer or device.
3. Run RUFUS and select the following parameters.
A. Device - Select your USB flash drive
B. Partition Scheme and target system type - GPT partition scheme for UEFI computer
C. File System – Fat32
D. Cluster Size - Leave as Default
E. New Volume Name - Winpe - it must be named this otherwise it won't work properly.
See photograph below as reference. Please make sure you check the box that says – create a bootable disk using ISO. Then you will upload the ISO you downloaded by right clicking the icon next to the ISO check box.
4. Turn off your Device and plug in your OTG cable and the Flash drive. Please use a USB 4 port HUB so you can use a keyboard if necessary.
5. Turn on device and constantly press the ESC button to get into BIOS.
6. Go to the last menu option and in the boot override section arrow down to "UEFI: <Thumbdrive>" and hit enter. If your device does not show boot override, you will need to manually set the Thumbdrive as first in priority under the boot options, then save/exit. It should then boot up and perform the flash and shutdown.
7. Remove Flash drive before restarting.
PLEASE LET ME KNOW IF THIS WORKED FOR YOU.
Best Regards,
Matthew
- Oldest First
- Popular
- Newest First
Sorted by Oldest FirstMatthew Meador
Hello,
Thank you for your patience. Can you please tell me your device name, model number, and serial number and I'll be sure to provide you with a ISO image for your Excursion XB.
Best Regards,
Matthew
Sikanderabbasi001
Hello
kindly send me windows 10 ISO recovery file.
Model No: VTA1005XB
SERIAL NO: A03011512000656
Regards
Sikander Abbasi
Sikanderabbasi001
MODEL: VTA1005XB
SERIAL: A03011512000656
Sikanderabbasi001
Matthew Meador
Hello,
Thank you for your patience. Please see the link and information below to install Windows on your device again.
Excursion XB A03
https://drive.google.com/open?id=1b-q2wvZQT6V-0r-feYd3gqGtDla2Q0IA
Please follow the steps below to restore your device to the original state.
1. Download Rufus format partition tool from the link below.
https://rufus.akeo.ie/
2. Plug in an empty Flash Drive that has at least 8 to 16 GB free into extra computer or device.
3. Run RUFUS and select the following parameters.
A. Device - Select your USB flash drive
B. Partition Scheme and target system type - GPT partition scheme for UEFI computer
C. File System – Fat32
D. Cluster Size - Leave as Default
E. New Volume Name - Winpe - it must be named this otherwise it won't work properly.
See photograph below as reference. Please make sure you check the box that says – create a bootable disk using ISO. Then you will upload the ISO you downloaded by right clicking the icon next to the ISO check box.
4. Turn off your Device and plug in your OTG cable and the Flash drive. Please use a USB 4 port HUB so you can use a keyboard if necessary.
5. Turn on device and constantly press the ESC button to get into BIOS.
6. Go to the last menu option and in the boot override section arrow down to "UEFI: <Thumbdrive>" and hit enter. If your device does not show boot override, you will need to manually set the Thumbdrive as first in priority under the boot options, then save/exit. It should then boot up and perform the flash and shutdown.
7. Remove Flash drive before restarting.
PLEASE LET ME KNOW IF THIS WORKED FOR YOU.
Best Regards,
Matthew
ALDO FLORES BAEZ
Alcon Villa Gonzalez
buenas me podrian ayudar con los controladores xb porfa
1 person likes this
-
Connecting your Bluetooth keyboard
-
How to install drivers
-
Facing issue when installing windows 10 in excursion xb
-
Need windows 10 ISO files for vulcan excursion xb
-
Facing issue to start my vulcan excursion xb
-
Windows issue with vulcan excursion xb
-
Vulcan Excursion XB ISO File
-
Please send me windows 10 ISO
-
Need windows 10 ISO Recovery file
See all 24 topics